Trick or Teat with LoRaWAN® – Halloween House Entrance Monitoring
Recently it was time for "trick or treat" again on Halloween. This year with LoRaWAN® house entrance monitoring. Find out more about the implementati…
Sensitive strips
Field Report: Healthy Room Climate in the Homeoffice with LoRaWAN® Part 2 – Humidity, Amount of Light & Conclusion
Most recently, it was shown here how you can ensure a healthy indoor climate with IoT sensors and the B.One Gallery, for example in the home office or…
Field Report: Healthy Room Climate in the Homeoffice with LoRaWAN® Part 1 – Setup, CO2 Level & Temperature
Most recently, it was shown here how you can ensure a healthy indoor climate with IoT sensors and the B.One Gallery, for example in the home office or…
IoT in Homeoffice & Office: Healthy Room Climate with LoRaWAN® Part 2 – Connection of an IoT Platform
In part 1 of this small series, we laid the foundations for monitoring the working/room climate in the home office and office with some theory and the…
IoT in Homeoffice Office: Healthy Indoor Climate with LoRaWAN® Part 1 – Basics Sensors
A healthy working/room climate is an important factor for high productivity in the home office and office. Learn how you can ensure this using LoRaWAN…
Monitoring garage doors with IoT sensors the B.One Gallery – Netvox R718F vs. Sensative Strips (Part 3)
– 📖🕓 ≈ 6 min – Last updated on 05.08.2024 After I showed you in part 1 and part 2 of this series what you need to monitor your garage door…
Monitoring Garage Doors with IoT Sensors & the B.One Gallery – Netvox R718F vs. Sensative Strips (Part 2)
– 📖🕓 ≈ 7 min – Last modified on 05.08.2024 Last week, in Part 1 of this small series, I showed you which components you can basically use to monitor your…
Monitoring Garage Doors with IoT Sensors & the B.One Gallery – Netvox R718F vs. Sensative Strips (Part 1)
– 📖🕓 ≈ 9 min – Last modified on 05.08.2024 As recently announced, I would like to use the example of two LoRaWAN® sensors and the B.One Gallery visualization tool to…
IoT and Me 2021 – insight into my project – heat protection in summer
– 📖🕓 ≈ 3 min – Last modified on 03rd May, 2024 Hello everyone and welcome to my blog post. For all those who don’t know me yet and haven’t read…
Sensative Strips Payload Configuration Part 2: Manual Adjustment
– 📖🕓 ≈ 6 min – Last modified on 11th April, 2024 I recently showed you how you can easily configure your strips (LoRaWAN) sensors yourself using the “Strips Configuration Application”.…